Embedded Computing Pm8560 ProcessorPMC module with up to 8 E1/T1/J1 interfaces

• Processor PMC (VITA32-2003) with up to 8 software selectable E1/T1/J1 interfaces
  
• Freescale Semiconductor MPC8560 PowerQUICC III communication processor
• Up to 512MB Double Data Rate SDRAM with ECC
• Up to 32MB Flash
• PCI bus operation of 32-bit/66 MHz
• 10/100/1000 Ethernet port
• Optional CTbus clock support
• Optional rear transition module for ATCA or 2.16/cPSB blades supporting E1/T1/J1 interfaces
• RoHS/WEEE compliant configuration available
• Quality assured by over 35 years of design experience and a TL-9000 and ISO 9001:2000 certified quality management system. (FM 26789)

The Pm8560 is a Processor PCI Mezzanine Card (ProcessorPMC) module with up to 8 E1/T1/J1 interfaces.

The Pm8560 is ideal for 3G (UTMS & W-CDMA) and 2.5G (GPRS) data and signaling applications. The module is capable of supporting a wide variety of protocols including SS7 and SIGTRAN. Other applications include signaling gateways and softswitches as a signaling interface card.

The Pm8560 includes a reduced media-independent interface (RMII) on Pn3 for Ethernet PHYs and management interface.

Physical connectivity of E1/T1/J1 spans the Pm8560 via rear transition modules (RTMs) that interface from either 2.16/cPSB blades or AdvancedTCA blades such as Emerson’s Katana product line.

• Up to 8 channelized E1 or T1/J1 spans
• Supports T1/CEPT and other user-defined protocols (customer provided software may be required)
• Automatically performs efficient packing
• Rear (PMC P14) E1/T1/J1 I/O
• Optional cPCI/2.16/cPSB or ATCA transition module available for rear I/O applications supporting 16 ports per system blade
• Surge protection for E1/T1/J1 ports on passive transition module

• RMII through P13 connector
• 10/100/1000 BaseT Ethernet with front panel access

• Subset of PTMC Configuration 2
• Serial Tx/Rx
• RMII
• RMII PHY Management I/F
• CT bus clocks

• EIA-232 serial console port accessible via front panel or P14 connector

• Up to 512 Mbytes Double Data Rate SDRAM
• Up to 32 Mbytes Flash memory
• Flash Architecture NOR

• 800 MHz PowerPC™ Book E core operation
• 266MHz when core is 800MHz MHz RISC-based Communications Processor Module (CPM)
• Communications functions
  • PCI bus interface
  • Ethernet controller
  • UART controller using SCC
  • TDM ports for eight T1/E1/J1 spans using MCC
  • ATM support via Inverse Multiplexing for ATM (IMA)
• System functions
  • DDR SDRAM controller
  • General purpose I/O (GPIO)
  • DMA
  • I²C controller

• Optional plug-on card (side 2) to speed development
• EIA-232 debug serial port with cable to DB-9 connector
• JTAG header for PLD programming
• JTAG/COP header for software development
• Four software-readable configuration jumpers
• 32-pin PLCC 8-bit socket for software development
• 2 user-programmable LEDs
• Single connector attached to PTMC module

• cPCI/cPSB (PICMG 2.16) formfactor
  • Supports up to 2 Pm8560 modules on a cPCI/cPSB baseboard (such as the Emerson Katana750 or Katana752i)
  • 8 RJ-45 connectors supporting 8 E1/T1/J1 ports from a single Pm8560 or 8 RJ-45 connectors supporting 16 E1/T1/J1 ports from 2 Pm8560 modules (requires breakout cables)
  • 100 ohms T1/J1 balanced interface
  • 120 ohms E1 balanced interface
  • T1/E1/J1 transformers with isolation and surge protection for every signal
  • RJ-45 connectors supporting console / debug ports from each Pm8560 module
• ATCA formfactor
  • Supports up to 4 Pm8560 modules on an ATCA baseboard (Such as the Emerson KatanaQp)
  • Support for up to 32 E1/T1/J1 ports with 4 Pm8560s. TTIP, TRING, RTIP and RRING are routed from Zone 3 connector through transformers and surge protection out the rear I/O faceplate
  • 100 ohms T1/J1 balanced interface
  • 120 ohms E1 balanced interface
  • T1/E1/J1 transformers with isolation and surge protection for every signal
  • Micro-D connectors support serial I/O from Pm8560(s)
  • Operating range: 0° to 55° C, 5-95% relative humidity (non-condensing)

• FCC Part 15 (US)
• ICES-003 (Canada)
• IEC/UL/CSA 60950
• NEBs: Telcordia
• EN55022
• EN55024
• EN300386

• Linux Support Package (LSP) for Monta Vista Carrier Grade Edition (CGE) 3.1

• Optional SpiderSS7 layers MTP1, MTP2 and MTP3, and SpiderSIGTRAN M2UA, M3UA and SCTP (professional services may be required for porting/configuration)

• Board format
  • Length: 149.0 mm (5.87 inches)
  • Width: 74.0 mm (2.91 inches)
• Baseboard and module fit in a single cPCI/cPSB or ATCA slot
• Power requirements: +3 & +5 VDC @ 11.5W typical
• Operating range: 0° to 55° C, 5-95% relative humidity (noncondensing)
• Specifications
  • IEEE 1386.1 CMC/PMC
  • VITA 32 ProcessorPMC

• Katana750i
• Katana752i
• KatanaQp