|
Systems
ATCA
and AMC
PMC
Modules
Processing
Blades
Protocol
Bundles
Request Documentation
|
|
Embedded
Computing
PmPPC750f
PowerPC™ based Processor PMC |
 |
- PowerPC 750FX processor running at 733MHz+
- 128MB, 256MB, 512MB or 1GB ECC SDRAM in SODIMM package
- 32/64-bit 33/66 MHz PCI with DMA
- Three 10/100 Ethernet interfaces
- Processor PMC Monarch and Non-Monarch modes
- Two serial I/O ports
- I2C interface
- RoHS/WEEE compliant configuration available
- Quality assured by over 35 years of design experience and
a TL-9000 and ISO 9001:2000 certified quality management system.
(FM 26789)
Emerson’s PmPPC750f is a complete processor subsystem
in a very compact, industry standard form factor. It is designed
to allow communication equipment manufacturers to add modular
and upgradeable compute functionality to their I/O baseboard
and provide the localized horsepower necessary for applications
such as protocol processing, packet processing, data filtering
or I/O management.
Using an off-the-shelf processor subsystem saves you time-to-market
by allowing you to focus your engineering efforts on the key
value-add portions of the system without spending time and effort
on the processor design and testing. A modular processor subsystem
also lowers your lifetime cost of ownership by providing an easy
upgrade path, and protecting you from obsolescence issues.
Considerable engineering effort has gone into ensuring maximum
flexibility on the PmPPC750f. The module can be used in both
Processor PMC Monarch and Non- Monarch modes, which means that
it can act as the host (Monarch) of the local PCI bus or be a
peripheral (Non-Monarch) on the local PCI bus depending on the
application or baseboard. We’ve also implemented the SDRAM
memory using SODIMM packaging, the same memory package used dominantly
in laptop computers.
PowerPC 750FX running at 733+
MHz
- 32-bit address bus, 64-bit data bus
- L1 Cache
- 32K, 32-byte line, 8-way set associative instruction
and data cache
- Singe-cycle cache access
- 512K on-chip core speed L2 Cache with ECC
- Floating-Point Unit (FPU)
SDRAM
- 128MB, 256MB, 512MB or 1GB SDRAM configurations with Error
Checking and Correction (ECC)
- Modular and upgradable SODIMM packaging
- 133MHz operation (100MHz for 1GB configuration)
Flash
- 16, 32 or 64 MByte Flash configurations
- Organized as 2 banks for protected field updateable
image
- Flash Architecture NOR
Ethernet
- Three 10/100Base Fast Ethernet ports with access via P14
connector
- Two of the 10/100BaseTX Ethernet ports available during
development via optional Development Mezzanine Card (DMC)
Serial Ports
- Two RS-232 asynchronous serial ports
- Both ports available with access via P14 connector
- One of the ports available via bezel or one of the ports
available during development via optional Development Mezzanine
Card (DMC)
I2C
- 2-wire independent bus
- Master or slave mode
- Access through P14 connector for end-user applications
General Purpose Timers
- Eight 32-bit counters/times
- 32-bit watchdog timer
Real-Time Clock
DMA
- 8-Channel DMA support
- High-speed data movement between any module resources without
significant CPU intervention
PCI
- 33/66MHz operation via Marvell Discovery system controller
- 32/64-bit data path
- Monarch and Non-Monarch mode support (local host or peripheral)
- PCI 2.2 compliant
LEDs and Switches
- 4 development user-programmable surface mount LEDs on PMC
module
- 4 development user-programmable surface mount LEDs on optional
Development Mezzanine Card (DMC)
- Recessed front panel reset switch
| Development Mezzanine
Card (DMC) |
- Optional plug-on card (side 2) to speed development
- Dual 10/100BaseTX Ethernet ports via 2 RJ45 connectors
- RS-232 debug serial port with cable to DB-9 connector
- Processor COP header for software development
- JTAG header for PCI bridge and on-card logic
- Four software-readable configuration jumpers
- 32-pin PLCC socket for software development
- Single connector to attach to PMC module
- Monitor with power-on self test
- Board support package for VxWorks
- Board support package for Linux
- Board support package for QNX
- Development Mezzanine Card (DMC)
- Serial Cable
- User Manual
- PMC Formfactor 149mm x 74mm
- Power supply: 3.3Vdc
- Power dissipation: 9W typical
- Operating range: 0° to 55° C, 5-95% relative humidity
(non-condensing)
- IEEE 1356.4
- VITA 32
- PCI 2.2
- UL/CSA 60950
- IEC 950
- Canada ICES-003
- EN55022 FCC Part 15
- NEBS Bellcore GR1089
- NEBS Bellcore GR63
- EN 300386

1/07 |