Embedded Computing KAT6200 Intel® Xeon®-based AdvancedTCA Server Blade

• 2 Dual-core Intel Xeon processors, LV 5100 series, 2.13GHz
• Intel 5000P Memory Controller Hub
• Intel 6321ESB I/O Controller Hub
• Up to 16GB using 4GB fully buffered DIMMs
• 1GB NAND Flash
• Redundant firmware hubs
• 16MB persistent memory for event logging
• 1 AdvancedMC® slot, single, mid size (x4 PCI Express, x2 SAS, x2 1Gb Ethernet) or Onboard 2.5" SAS Hard Drive
• Intelligent Platform Management Controller
• ATCA PICMG 3.0 form factor
• RoHS/WEEE compliant
• Quality assured by TL-9000 and ISO 9001:2000 certified quality management system. (FM 26789)

AdvancedTCA® is a collaboration of major telecom OEMs and suppliers to create an optimal platform for telecom infrastructure equipment that provides an open specification based solution with an ecosystem of off-the-shelf functions in hardware and software required to implement highly available equipment.

Emerson's Katana® KAT6200 is an AdvancedTCA server node based upon dual high performance Intel Xeon LV5100 series (Woodcrest) processors, enterprise/carrier grade Linux® support, and flexible AdvancedMC expansion. The KAT6200 server blade is ready for the most demanding telecom applications with features such as persistent memory for event logging and redundant firmware for protection against unsuccessful firmware field upgrades.

KAT6200’s AdvancedMC (AMC.0 R2.0) mid-size expansion slot gives telecom OEMs access to a wealth of third party AdvancedMCs for I/O, storage, and co-processing. This off-the-shelf expansion capability makes it easy to configure the KAT6200 for a wide variety of control and packet processing applications including application server and database intensive applications in wireless infrastructure.

In telecom network elements, system management is essential to support high availability. KAT6200 is an intelligent FRU and implements a redundant System Management Bus (SMB). It also fully supports the Intelligent Platform Management Interface (IPMI) with AdvancedTCA extensions to support standards-based shelf management.

• 2 Dual-Core Intel Xeon processors, LV 5100 series, 2.13GHz
• Front side bus 1066MT/s
• 4MB L2 Cache per processor

• Intel 5000P Memory Controller Hub
• Intel 6321ESB I/O Controller Hub

• Up to 16GB w/ECC using 4GB fully buffered DIMMs
• Four DIMM slots
• 1GB NAND Flash
• 16 MB PSRAM
• 2 x 2MB Firmware Hub

• 1 AdvancedMC slot, single-width, mid-size (x4 PCI Express, x2 SAS, x2 1Gb Ethernet)

• On-board 2.5" SAS Hard Drive

• Serial I/O
  • 2 USB ports
  • 1 serial port (RJ-45)
  • 232 Signaling
  • Console
• Ethernet
  • 2 10/100/1000 Ethernet ports (RJ-45)
• LEDs And Switches
  • ATCA Hotswap LED
  • ATCA Failure/Out of Service LED (LED1)
  • ATCA Health Status (LED2)
  • POST Status LED
  • Power Status LED
  • 8 LED Indicators for Base/Fabric I/F Link/Activity
  • Payload Soft Reset Button, Recessed
  • IPMC/CPU Console Change Button, Recessed

• Dual GbE ATCA base interface
• Dual GbE ATCA fabric interface (PICMG 3.1 option 1)
• Dual IPMB interface (Zone 1)
• Support for RTM (Zone 3)

• 1 SAS port
• 4 PCI Express ports

• Intelligent Platform Management Controller (IPMC)
• Conformance to ATCA Base Specification (PICMG 3.0, rev 2.0)
• Dual redundant IPMB-A/B interfaces
• E-keying and hot-swap features in the ATCA shelf and AMC modules

• ATCA PICMG® 3.0 form factor
• Power requirements: -38VDC to -72VDC, < 200W max (DP, 16GB, HDD)
• Operating range: -5°C to 55°C
• Storage range: -40°C to 70°C
• Airflow Operating: 36 cfm @ 55°C estimated

• UL/CSA/IEC 60950
• FCC Part 15 (US)
• ICES 003 (Canada)
• NEBS: Telecordia™ GR-1089 and GR-63, applicable sections
• EN55022
• EN55024
• EN300 386

• Phoenix® BIOS w/POST
• Red Hat Enterprise Linux (RHEL)
• MontaVista® Linux Carrier Grade Edition (CGE) (call for availability)